Robot battle · Sourced specifications
UR5e vs Doosan Robotics M0609
Both are six-axis collaborative arms with the same published ±0.03 mm repeatability and IP54 protection. M0609 carries 1 kg more (6 kg against 5 kg), reaches 50 mm further (900 mm against 850 mm) and senses torque in every joint. UR5e is 6.8 kg lighter, publishes a maximum TCP speed and has a force/torque sensor at the tool flange with published accuracy figures.
Several rows are published on different bases: Doosan gives a typical power figure and a minimum tool speed for its whole range, and does not name the test standard behind its repeatability. Each row shows the published value, its source and, where it matters, why the figures are not like for like.
Editorial source check: 20 November 2026. Specialist technical review: not yet performed. Why we say this
At a glance
Specification by specification
Source on every row| Specification | Universal Robots UR5e | Doosan Robotics M0609 |
|---|---|---|
| Maximum payloadWhat is this? | 5 kg [1]Usable payload falls as the tool's centre of gravity moves away from the flange; the PDF datasheet includes a payload-versus-offset chart. | 6 kg [8] |
| ReachWhat is this?Neither cited document names the reference point for its single reach figure. | 850 mm [1] | 900 mm [8]The catalogue gives one reach figure and does not name the reference point. |
| RepeatabilityWhat is this?Universal Robots cites ISO 9283; Doosan's catalogue names no standard. | ±0.03 mm (ISO 9283) [1] | ±0.03 mm [8]The catalogue does not name the test standard. Doosan's M0609 product page gives the same figure. |
| Degrees of freedomWhat is this? | 6 rotating joints [1] | 6 axes [8] |
| TCP speedWhat is this?A maximum against a lower bound stated for Doosan's whole range. | 4 m/s [1] | Over 1 m/s [8]Doosan states one lower bound for its whole range rather than a maximum for this model. |
| Joint working rangesWhat is this? | ±360° on all six joints [1]Also published ±360° on all joints except the elbow, ±160° [2] | ±360° on J1, J2, J4, J5 and J6; ±150° on J3 [8] |
| Maximum joint speeds | ±180°/s on all six joints [1] | 150°/s (J1–J2), 180°/s (J3), 225°/s (J4–J6) [8] |
| Robot weight | 20.7 kg [1]Also published 20.6 kg [3] | 27.5 kg [8] |
| Mounting | Any orientation [1] | Any orientation [8] |
| Robot arm cable | 6 m [1] | AC controller: 6 m standard, 3 m option. DC controller: 3 m standard, 6 m option [8] |
| Ingress protection | IP54 [1] | IP54 [8] |
| Ambient operating temperature | 0–50 °C [1]The SW 10.12 manual adds that above 35 °C the robot may operate at reduced speed and performance. | 0–45 °C [8] |
| NoisedB(A) against dB with no stated weighting. | < 67 dB(A) [1]Also published < 65 dB(A) [3]Also published Robot arm < 60 dB(A); control box < 50 dB(A) [2] | < 65 dB [8]No weighting stated. |
| Safety rating | EN ISO 13849-1 (PLd, Category 3); EN ISO 10218-1 [1] | EN ISO 13849-1 PL e, Category 4 for emergency stop; PL d, Category 3 for other safety functions; EN ISO 10218-1 [8] |
| Typical power consumptionNeither manufacturer gives the test conditions behind its typical figure. | 200 W at moderate operating settings [3]Not listed on the September 2026 online datasheet. The SW 10.12 manual gives approximately 200 W using a typical program. | 370 W [8]Doosan labels this figure typical and does not state the test conditions. |
| Tool digital I/O | 2 inputs, 2 outputs [1] | 2 inputs, 2 outputs [8] |
| Tool power supply | 12/24 V; 1.5 A dual pin, 1 A single pin [1] | 24 V or 12 V DC, maximum 3 A, through two connectors (X1, X2) [8] |
| Tool flangeWhat is this? | EN ISO 9409-1-50-4-M6 [1] | Unknown: not published in the documents cited |
| Controller | e-Series control box (OEM version also available) [1] | CS-01 (100–240 V AC) or CS-02 (20–60 V DC) [8] |
| Controller I/O | 16 digital in, 16 digital out, 2 analog in, 2 analog out, 4 quadrature digital inputs [1] | 16 digital in, 16 digital out, 2 analog in, 2 analog out, external encoder input [8] |
| Industrial protocols | Modbus TCP (client/server), EtherNet/IP adapter, PROFINET device, PROFIsafe, ROS/ROS2 [1] | Modbus TCP (master/slave), Modbus RTU (master), PROFINET IO (device), EtherNet/IP (adapter), TCP/IP [8]Serial RS-232/422/485 needs a USB-to-serial converter, which is not included. |
| Programming | 12-inch touchscreen with PolyScope graphical user interface [1] | Teach pendant with 10.1-inch display; DART-Platform for Windows, Mac and Android tablets; DART-Studio (DRL scripting and simulator); App Builder [8] |
Where UR5e leads on published figures
- Lighter published arm: 20.7 kg including cable against 27.5 kg.
- A published maximum TCP speed of 4 m/s. Doosan states only "over 1 m/s" for its whole range.
- ±360° on every joint, where M0609 limits J3 to ±150°.
- A tool-flange force/torque sensor with published range, precision and accuracy figures.
- A wider published ambient temperature range: 0–50 °C against 0–45 °C.
- A published tool flange standard (EN ISO 9409-1-50-4-M6) and a lower typical power figure: 200 W against 370 W, with the caveat in the table.
Where M0609 leads on published figures
- Higher published payload: 6 kg against 5 kg.
- Longer published reach: 900 mm against 850 mm.
- Faster published joint speeds: 150°/s on J1–J2, 180°/s on J3 and 225°/s on J4–J6, against 180°/s on every UR5e joint.
- Torque sensors in each of the six joints.
- PL e, Category 4 published for the emergency stop; both arms publish PL d, Category 3 for their other safety functions.
- A DC controller option (CS-02, 20–60 V DC) alongside the AC controller.
What cannot fairly be compared
- Repeatability: both publish ±0.03 mm. Universal Robots states ISO 9283; Doosan's catalogue does not name the test, so the equal figures may not share a basis.
- Speed: Universal Robots publishes a 4 m/s maximum TCP speed. Doosan's catalogue gives "over 1 m/s" for every series, which is a floor rather than a ceiling. In a collaborative cell the risk assessment sets the usable speed for both.
- Force sensing: UR5e measures force and torque at the tool flange and publishes its accuracy. M0609 senses torque in every joint; Doosan publishes no range or accuracy for it. The architectures differ, and neither specification describes contact behaviour in your application.
- Power: both figures are labelled typical, but neither manufacturer states the duty cycle behind them. UR5e's 570 W maximum has no Doosan equivalent in the catalogue.
- Weight: Universal Robots' 20.7 kg includes the arm cable. Doosan's catalogue does not say whether 27.5 kg does.
Questions to answer before choosing
- What is the heaviest tool plus part, and how far is its centre of gravity from the flange? Check each manufacturer's payload chart, not only the headline figure.
- Does the task need J3 to travel beyond ±150°, or a tool that needs a published flange standard?
- Will the cell run collaboratively, fenced, or switch between modes? That decides the usable speed.
- Does the site run on mains AC, or would a 20–60 V DC controller suit a mobile or battery-powered cell?
- Which controller, fieldbus and programming tools does the site already support, and who will service the arm locally?
This comparison uses manufacturer documentation only. RoboMag has not tested either arm, and the published figures are not a performance ranking.
Sources for every value
- [1] UR5e technical specification (manufacturer’s current PDF)Universal Robots · Specifications checked against the September 2026 edition · accessed 8 October 2026
- [2] UR5e technical specifications, user manual appendixUniversal Robots · Online user manual, SW 10.12 edition · accessed 8 October 2026
- [3] UR5e e-Series datasheet (PDF)Universal Robots · Dated 08/2023, updated December 2024 · accessed 8 October 2026
- [4] DH parameters for calculations of kinematics and dynamicsUniversal Robots · Support article; UR5e/UR7e table · accessed 8 October 2026
- [5] Service Handbook, e-SeriesUniversal Robots · PolyScope 5.26 / PolyScope X 10.12 · accessed 8 October 2026
- [6] Inspection plan, e-Series service manualUniversal Robots · SW 5.26 edition · accessed 8 October 2026
- [7] UR5e PolyScope 5 user manual (PDF)Universal Robots · accessed 18 November 2026
- [8] Doosan Robotics product catalogue, technical specificationDoosan Robotics · English edition, PDF dated January 2025; specification table on page 15 · accessed 20 November 2026
- [9] M0609 product pageDoosan Robotics · accessed 20 November 2026