Doosan Robotics · Collaborative robot · Commercial product

M0609

M0609 is the 6 kg, 900 mm arm in Doosan Robotics' M-series of collaborative robots, with ±0.03 mm repeatability and a torque sensor in each of its six joints.

Editorial source check: 20 November 2026. Specialist technical review: not yet performed. Why we say this

Machine Index record · Doosan Robotics

M0609

Maximum payload
6 kg
Reach
900 mm
Degrees of freedom
6 axes
Repeatability
±0.03 mm

No licensed photograph is available yet. RoboMag publishes images only with a verifiable licence.

Key specifications

Every value sourced
Maximum payload
6 kg [1]
Reach
900 mm [1]
Degrees of freedom
6 axes [1]
Repeatability
±0.03 mm [1]
Tool speed
Over 1 m/s [1]
Ingress protection
IP54 [1]
Ambient operating temperature
0–45 °C [1]
Robot weight
27.5 kg [1]

The M-series has four arms: M0609 (6 kg, 900 mm), M0617 (6 kg, 1,700 mm), M1013 (10 kg, 1,300 mm) and M1509 (15 kg, 900 mm). They share the CS-01 and CS-02 controllers, IP54 protection and joint torque sensing.

M0609 official documents

Opens the manufacturer’s site

Full specifications

26 fields

Performance

Maximum payload What is this?6 kg [1]
Reach What is this?900 mm [1]The catalogue gives one reach figure and does not name the reference point.
Degrees of freedom What is this?6 axes [1]
Repeatability What is this?±0.03 mm [1]The catalogue does not name the test standard. Doosan's M0609 product page gives the same figure.

Motion

Tool speed What is this?Over 1 m/s [1]Doosan states one lower bound for its whole range rather than a maximum for this model.
Joint working ranges What is this?±360° on J1, J2, J4, J5 and J6; ±150° on J3 [1]
Maximum joint speeds150°/s (J1–J2), 180°/s (J3), 225°/s (J4–J6) [1]

Force and torque sensing

Force and compliance controlTorque sensors built into each joint [1]Doosan's product page describes six torque sensors. Neither document gives a force measurement range, precision or accuracy.

Safety

Safety certificationEN ISO 13849-1 PL e, Category 4 for emergency stop; PL d, Category 3 for other safety functions; EN ISO 10218-1 [1]
Certification marksKCs, CE, NRTL [1]

Power

Typical power consumption370 W [1]Doosan labels this figure typical and does not state the test conditions.

Environment

Ingress protectionIP54 [1]
Ambient operating temperature0–45 °C [1]
Noise< 65 dB [1]No weighting stated.

Physical

Robot weight27.5 kg [1]
MountingAny orientation [1]
Robot arm cable lengthAC controller: 6 m standard, 3 m option. DC controller: 3 m standard, 6 m option [1]

Tool flange and I/O

Tool digital I/O2 inputs, 2 outputs [1]
Tool communicationRS-485 (pseudo) [1]
Tool power supply24 V or 12 V DC, maximum 3 A, through two connectors (X1, X2) [1]

Controller and communications

ControllerCS-01 (100–240 V AC) or CS-02 (20–60 V DC) [1]
Controller ingress protectionIP30 (CS-01); IP20 (CS-02) [1]
Controller I/O16 digital in, 16 digital out, 2 analog in, 2 analog out, external encoder input [1]
Controller I/O power supply24 V DC, 2 A [1]
Industrial protocolsModbus TCP (master/slave), Modbus RTU (master), PROFINET IO (device), EtherNet/IP (adapter), TCP/IP [1]Serial RS-232/422/485 needs a USB-to-serial converter, which is not included.

Programming

ProgrammingTeach pendant with 10.1-inch display; DART-Platform for Windows, Mac and Android tablets; DART-Studio (DRL scripting and simulator); App Builder [1]
JointWorking rangeMaximum speedSource
J1±360°150°/s[1]
J2±360°150°/s[1]
J3±150°180°/s[1]
J4±360°225°/s[1]
J5±360°225°/s[1]
J6±360°225°/s[1]

M0609 reach, drawn to scale

How reach is measured
Plan view: M0609 published reach of 900 mm drawn as a circle around the base axis, with 500 mm grid rings500 mm1,000 mm900 mmGrid every 500 mm · base axis at centre
Published reach: 900 mm [1]. The circle shows that figure as a radius from the base axis, measured to the reference point the manufacturer names. The usable workspace is smaller: the area close to the base, joint limits, the tool and the mounting all reduce it. Use the manufacturer’s dimension drawing for cell layout.

Where M0609 sits in the M-series

M0609 and M1509 share the shortest M-series reach, 900 mm. M0609 carries 9 kg less payload but is the lighter arm (27.5 kg against 33 kg), and Doosan gives it a lower typical power figure (370 W against 390 W). M0617 keeps the 6 kg payload and extends reach to 1,700 mm.

Safety ratings

Doosan rates the emergency stop at EN ISO 13849-1 PL e, Category 4, and its other safety functions at PL d, Category 3. Torque sensors in each joint provide the force and compliance control. The robot's rating does not make a cell collaborative: the application's risk assessment decides that.

What remains unknown

The catalogue does not publish a tool flange standard, a maximum TCP speed for this model, the reference point for its reach figure, or the test standard behind its repeatability. RoboMag leaves those fields out rather than estimating them.

RoboMag has not physically tested M0609. Reliability, cycle-time and ownership-cost conclusions would need separate evidence.

Primary sources

  1. [1] Doosan Robotics product catalogue, technical specificationDoosan Robotics · English edition, PDF dated January 2025; specification table on page 15 · accessed 20 November 2026
  2. [2] M0609 product pageDoosan Robotics · accessed 20 November 2026