ABB Robotics · Collaborative robot · Commercial product

GoFa 12

GoFa 12 (CRB 15000-12/1.27) is ABB's highest-payload collaborative arm: 12 kg handling capacity, 1,270 mm reach to the wrist centre, IP67 as standard and integrated joint torque sensors.

Editorial source check: 20 November 2026. Specialist technical review: not yet performed. Why we say this

Machine Index record · ABB Robotics

GoFa 12

Maximum payload
12 kg
Reach
1,270 mm to wrist centre; 1,380 mm to tool flange
Degrees of freedom
6 axes
Pose repeatability
0.02 mm (RP, ISO test plane)

No licensed photograph is available yet. RoboMag publishes images only with a verifiable licence.

Key specifications

Every value sourced
Maximum payload
12 kg [1]
Reach
1,270 mm to wrist centre; 1,380 mm to tool flange [1]
Degrees of freedom
6 axes [1]
Pose repeatability
0.02 mm (RP, ISO test plane) [1]
Maximum TCP speed
2.2 m/s [2]
Ingress protection
IP67 (standard) [1]
Robot weight
48 kg [1]

ABB sells GoFa in three variants: GoFa 5 (CRB 15000-5/0.95), GoFa 10 (CRB 15000-10/1.52) and GoFa 12 (CRB 15000-12/1.27). This record covers GoFa 12; GoFa 10 shares its controller, axis speeds and IP67 protection.

GoFa 12 official documents

Opens the manufacturer’s site

Full specifications

25 fields

Performance

Maximum payload What is this?12 kg [1]Handling capacity in ABB's product specification. ABB's product page lists 14 kg (wrist-down configuration); check the load diagram for your tool's centre of gravity.Also published: 14 kg (wrist-down configuration) [2]
Reach What is this?1,270 mm to wrist centre; 1,380 mm to tool flange [1]Also published: 1.27 m to wrist centre; 1.37 m to flange [2]
Degrees of freedom What is this?6 axes [1]
Pose repeatability What is this?0.02 mm (RP, ISO test plane) [1]Measured at rated maximum load, maximum offset and 1.6 m/s on the inclined ISO test plane with all six axes moving; ABB lists ISO 9283 among the applicable standards. Average of a small number of robots.
Pose accuracy (AP) What is this?0.02 mm [1]ABB defines AP here as the difference between the taught position and the average position during program execution, not absolute accuracy.
Path repeatability (RT)0.058 mm [1]
Path accuracy (AT)2.377 mm [1]Standard robot. ABB's product page describes path accuracy down to 0.03 mm with the optional Ultra Accuracy feature.
Pose stabilisation time0.887 s (within 0.1 mm) [1]

Motion

Maximum TCP speed What is this?2.2 m/s [2]Stated for the GoFa family on ABB's product page; the product specification gives axis speeds rather than a TCP figure.
Joint working ranges What is this?±270° on axes 1 and 6; ±180° on axes 2, 4 and 5; −225° to +85° on axis 3 [1]Axis 1 on a wall-mounted robot depends on payload and the other axes; ABB recommends simulating in RobotStudio.
Maximum joint speeds120°/s (axes 1–2), 125°/s (axis 3), 200°/s (axes 4–6) [1]
Maximum joint torque, axis 1390 Nm [1]

Safety

Safety ratingPL d, Category 3 [2]
Design standardsISO 10218-1:2011; ISO/TS 15066 for collaborative operation [1]

Power

Power consumption0.25 kW at maximum load on the ISO cube [1]ABB gives one figure for all CRB 15000 variants, based on 230 V input to the controller.

Environment

Ingress protectionIP67 (standard) [1]According to IEC 60529. GoFa 5 is IP54 as standard.
Cleanroom classificationISO Class 4 (ISO 14644-1) [1]
Ambient operating temperature5 °C to 45 °C; down to 0 °C with RobotWare 8.2 or later [1]
Noise< 50.2 dB(A) Leq outside the working space [1]

Physical

Robot weight48 kg [1]Nominal; excludes options, tools and other equipment.
MountingFloor (0°), wall (any angle) or suspended (180°) [1]

Tool flange and I/O

Customer connectionsCustomer power 24 V / 3 A and customer signals 24 V / 500 mA, routed inside the arm [1]No overcurrent protection on the customer power circuit; ABB requires an external fuse.

Controller and communications

ControllerOmniCore C30 (the only supported controller) [1]

Programming

ProgrammingFlexPendant apps, lead-through programming and RobotStudio offline programming [2]

Sensing

Joint sensingIntegrated torque sensors for power and force limiting [2]
JointWorking rangeMaximum speedSource
Axis 1−270° to +270°120°/s[1]
Axis 2−180° to +180°120°/s[1]
Axis 3−225° to +85°125°/s[1]
Axis 4−180° to +180°200°/s[1]
Axis 5−180° to +180°200°/s[1]
Axis 6−270° to +270°200°/s[1]

GoFa 12 reach, drawn to scale

How reach is measured
Plan view: GoFa 12 published reach of 1,270 mm drawn as a circle around the base axis, with 500 mm grid rings500 mm1,000 mm1,500 mm2,000 mm1,270 mmGrid every 500 mm · base axis at centre
Published reach: 1,270 mm to wrist centre; 1,380 mm to tool flange [1]. The circle shows that figure as a radius from the base axis, measured to the reference point the manufacturer names. The usable workspace is smaller: the area close to the base, joint limits, the tool and the mounting all reduce it. Use the manufacturer’s dimension drawing for cell layout.

Reach across the ABB Robotics range

Each bar is the first reach figure on that model’s profile. Manufacturers may measure to different reference points, so compare within one maker’s range.

Two payload figures

ABB's product specification gives GoFa 12 a handling capacity of 12 kg. Its GoFa product page lists 14 kg (wrist-down configuration). Both are ABB figures for different conditions, so size the tool against the load diagram in the product specification rather than either headline number.

Repeatability and accuracy

The product specification gives 0.02 mm pose repeatability and 0.02 mm pose accuracy, measured at rated load and 1.6 m/s on the inclined ISO test plane. Path accuracy on the standard robot is 2.377 mm; ABB describes its optional Ultra Accuracy feature as reaching path accuracy down to 0.03 mm and absolute accuracy of 0.1 mm.

What remains unknown

The documents cited here do not publish a tool flange standard or tool I/O count for GoFa 12, and the product specification does not give a maximum TCP speed for this variant. RoboMag leaves those fields out rather than estimating them.

RoboMag has not physically tested GoFa. Reliability, cycle-time and ownership-cost conclusions would need separate evidence.

Specification history

2 differences

ABB Robotics’ own documents do not always publish the same value. RoboMag shows the value from the newest dated document that publishes each field and keeps the others visible, with the document behind each, rather than silently overwriting them.

FieldCurrent valueOther official values
Maximum payload12 kg [1]14 kg (wrist-down configuration) [2]
Reach1,270 mm to wrist centre; 1,380 mm to tool flange [1]1.27 m to wrist centre; 1.37 m to flange [2]

Applications

As listed by ABB Robotics [2]
  • Machine tending
  • Welding
  • Palletizing
  • Assembly
  • Screwdriving

No permanent comparison has been published for GoFa 12 yet. RoboMag publishes one only when both machines have enough sourced, like-for-like data. Use the comparison tool to place sourced profiles side by side.

Primary sources

  1. [1] Product specification CRB 15000 (OmniCore)ABB · Document ID 3HAC077390-001, revision Y, © 2021–2026 · accessed 20 November 2026
  2. [2] GoFa collaborative robotsABB Robotics · Product family page, variants table · accessed 20 November 2026